Table of Contents
How do you take the bed off a Dodge Dakota?
How to Remove a Truck Bed from a Dodge Dakota
- Open the gas filler door and remove the four small screws that hold the filler neck to the body.
- Move to the rear of the truck and remove the small diamond-shaped plate encircling the spare tire winch drive tube.
- Disconnect the connector to the tail lights.
What tools do you need to take off a truck bed?
Replace the gas cap on the gas tank.
- Two large saw horses.
- Ratchet/socket set.
- Wrench.
- Jack.
- Jack stands.
How big is the bed of a Dodge Dakota?
Both 6.5- and 8-foot beds were offered.
How do you take the bed off a Dodge truck?
How to Remove a Dodge Truck Bed
- Raise the hood.
- Move to the fuel door located on the truck panel.
- Slide under one side of the rear part of the truck, underneath the taillight lens.
- Move underneath the vehicle and locate the large truck bed mounting bolts.
- Shift the truck bed by hand to see if it will move or slide.
How many bolts hold a Dodge bed on?
Move underneath the vehicle and locate the large truck bed mounting bolts. There will be six for the mid-size and smaller model beds, and eight bolts for the full-size Doge truck versions.
How is a pickup truck box assembly attached to the frame?
A frame assembly is mounted on a pickup truck for selectively removably attaching a flexible cover over an open bed of the truck. The truck bed is defined by a pair of spaced, parallel upright sidewalls and a pair of spaced, parallel upright front and rear walls which extend transversely between the sidewalls.
What is the best year for Dodge Dakota?
What’s the Best Year for a Dodge Dakota? The 2004 Dodge Dakota is the best in terms of performance and reliability, but only if you’re driving a manual.
Do Dodge Dakotas have transmission problems?
Problem – Drivers may experience 42RLE transmission problems that include slipping and harsh shifts.
How to remove the bed from a Dodge truck?
How to Remove a Dodge Truck Bed. 1 Step 1. Raise the hood. Disconnect the negative battery cable at its post with an end wrench. Use the floor jack to lift the rear end of the truck up 2 Step 2. 3 Step 3. 4 Step 4.
How do you remove the fuel tank from a Dodge truck?
Move to the fuel door located on the truck panel. Ignore this step for older, cab-mounted fuel tanks. Open the fuel door and remove the fuel cap. If the cap has a security line attached to it, remove the line from the fuel door frame with a Phillips screwdriver. You will see three screws that hold the tank filler neck to the truck bed frame.
Where are the bolts on a Dodge Dakota?
Locate and remove the eight bolts holding the bed to the frame. These bolts are accessed from under the truck and are located in the front and rear corners and at the middle cross members.
Where is the spare tire winch on a Dodge Dakota?
Move to the rear of the truck and remove the small diamond-shaped plate encircling the spare tire winch drive tube. The plate is held on with two small screws. Disconnect the connector to the tail lights. This connector is located in the rear of the truck, near the spare tire winch drive tube.